The Advantages of Ultrasonic Spraying Coated
The advantages of ultrasonic spraying Coated:
1. High stability
Made of high-performance titanium alloy and stainless steel, it has strong adaptability, corrosion resistance, no pressure, no noise, no nozzle wear and blockage, and high uniformity of atomized particles.
2. Energy conservation and environmental protection
The impact of spray is very small, which will not cause liquid splashing, and can reduce the waste of raw materials and air pollution caused by reverse spray.
3. Forming is controllable
It can accurately control the atomization flow. Low flow continuous spray. The spray shape is easy to control and shape (increase the spray manipulator), which is applicable to the industrial field. By combining, the atomization amount can meet any user's requirements.
4. Easy to maintain
The liquid is transported to the nozzle by gravity or low-pressure pump, achieving continuous or intermittent atomization. During atomization, no cooling water is required, resulting in low energy consumption, simple equipment, low failure rate, and maintenance free daily operations.
5. Wide application range
The size of atomized particles is determined by the ultrasonic frequency and is independent of the nozzle diameter. It is difficult to block the nozzle while maintaining ultrasonic oscillation during atomization. This nozzle can be applied to various solutions, and can even atomize sewage, chemical liquids, and oil viscous liquids.
Introduction to Traditional Spray Painting:
Traditional spraying is a coating method that uses a spray gun or disc atomizer, with the help of pressure or centrifugal force, to disperse into uniform and fine mist droplets and apply them to the surface of the coated object. It can be divided into air spraying, airless spraying, electrostatic spraying, and various derivative methods of the basic spraying forms mentioned above, such as high flow and low pressure atomization spraying, thermal spraying, automatic spraying, multi group spraying, etc.
The characteristics of traditional spraying:
1. Utilize the kinetic energy of two fluids, gas and liquid, for atomization
2. The impact force of spray is large, which will cause splash and waste of raw materials
3. Poor uniformity of atomized particles
4. The size of atomized particles is determined by the nozzle diameter
When the nozzle is very thin, it is easy to block the nozzle
6. The spray flow can not be accurately controlled and can not be continuously sprayed at low flow
