Ultrasonic Iindium Coated Superconducting Wire Technology

Hangzhou Shengtu Technology Co., Ltd. is one of the leading manufacturers and suppliers of ultrasonic iindium coated superconducting wire technology in China. Welcome to buy high quality customized products at low price from our factory. Contact us for more details.

 

 

 

The ultrasonic wire indium coating device generates high-frequency ultrasonic vibration. Then it is transferred to the coating liquid via the coating device. The indium materials in the coating solution will be uniformly disbursed and connected to the surface of the superconductor thru the coating machine below the motion of ultrasonic vibration, forming a uniform coating.

Indium coating on superconductors normally refers to coating a layer of indium materials on the surface of superconducting substances (such as copper oxide) to improve the electrical overall performance of superconductors.

 

 

 

1. Do not use flux

Flux will generate micro bubbles inside the welding process, which can cause welding defects such as cracks over time. Ultrasonic technology does not use flux during the welding process, so it will not cause progressive corrosion due to residual flux in the welding area.

2. Environmentally friendly welding solutions

Ultrasonic welding technology does not use flux, so it does not require gas discharge facilities or wastewater treatment facilities to treat harmful gases generated by flux.

3. The coating is firm and will not peel off.

4. The coating is uniform, without blind spots or ripples.

5. Reduce production costs

No need for flux process and flux cleaning process, greatly reducing equipment and production costs, and improving productivity by simplifying welding process.

6. Improve production efficiency

Applying a copper plate with an area of 1500 * 190mm only takes 15 minutes (vibration twice). Applying ITO glass with an area of 50 * 50mm only takes 1 minute (vibration 3 times).

7. Assist in developing new products

Traditional flux welding methods cannot be used, while ultrasonic technology can be used to bond materials that are difficult to weld and develop new products.

Ultrasonic target binding equipment is also known as ultrasonic indium coating machine or ultrasonic indium loading machine because the most common binding target is indium. The drawbacks of manual indium coating are very obvious. Firstly, the indium coating is uneven, which can lead to poor performance of the coated material; Secondly, due to the manual scraping method used, the indium coating may become unstable and prone to detachment; Again, the efficiency of manual scraping and coating is very low, which consumes a lot of manual labor; Finally, due to control or other reasons, it may lead to the waste of indium metal. The ultrasonic indium coating technology has effectively solved these problems.

For substrates of different shapes, ultrasonic indium coating machines can be used for surface coating of flat targets, inner circular targets, and outer circular targets, replacing the outdated technology of manual scraping in the past.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Hot Tags: ultrasonic iindium coated superconducting wire technology, China ultrasonic iindium coated superconducting wire technology manufacturers, suppliers, factory, Superconducting Cable Coated With Indium Superconductors, Manufacturing Superconducting Magnets By Ultrasonic Indium Coating, Ultrasonic Iindium Coated Superconducting Wire Technology, Environmentally Friendly Ultrasonic Immersion Soldering Tin Solution Without Flux, 20Khz New Scraping Technology By Ultrasonic Indium Coating Equipment, 20Khz 1000W Ultrasonic Flat Indium Coating Device