Products

Ultrasonic Molten Metal Atomizers

Item No: FSM-5005-R-1
Ultrasonic Metal Atomizer
Frequency: 50khz
Power: 500w
Input Voltage : 220V±10%,50/60Hz
Average particle size of powder: 28-35m(Approximately 450 mesh)
Powder production capacity: 1-15kg/h
Application: Tin, indium, bismuth and other metal powders

Send Inquiry

Hangzhou Shengtu Technology Co., Ltd. is one of the leading manufacturers and suppliers of ultrasonic molten metal atomizers in China. Welcome to buy high quality customized products at low price from our factory. Contact us for more details.

Description:

Ultrasonic tin atomization is to use the energy of ultrasonic wave to disperse the molten tin to form tiny particles with the size of several microns to more than 100 microns. This metal spray technology is widely used in industry and research and development fields, and will gradually replace the traditional pressure spraying.

Principle:

Ultrasonic low melting point metal powder production achieves efficient and uniform metal powder production by combining high-frequency sound wave excitation, atomization of molten metal, and rapid cooling principles. The principle of ultrasonic metal powder production mainly involves the process of converting molten metal into small metal particles.

Parameters:

Application:

Ultrasonic metal powder production uses ultrasonic waves to atomize melted metal into powder. The solder powder (such as indium powder) prepared by ultrasonic atomization process has good sphericity, narrow particle size distribution, and low oxygen content. The method of ultrasonic atomization can be used to produce metal powder. When the ultrasonic power generator excites the ultrasonic transducer, the ultrasonic tool head that serves as the transducer load vibrates, and the melted metal solution is atomized through ultrasonic vibration. Then, the droplets of metal particles cool and solidify in the air before falling into the powder collection cylinder and collecting to form metal powder. The atomization of various molten metals is commonly used to prepare metal powder or solder powder. Preparation of metal powders such as tin, indium, bismuth, etc.