High Focused Spray Ultrasound Round Up Atomizing Coated Nozzles with 100Khz Frequency

Hangzhou Shengtu Technology Co., Ltd. is one of the leading manufacturers and suppliers of high focused spray ultrasound round up atomizing coated nozzles with 100khz frequency in China. Welcome to buy high quality customized products at low price from our factory. Contact us for more details.

 

 

 

100 kHz high‑focus round ultrasonic atomizing coated nozzles utilize a piezoelectric transducer at the nozzle tip to produce high‑frequency vibration, which creates capillary waves across the liquid film.

Fabricated from highly durable materials including titanium, these nozzles perform reliably in harsh operating conditions and are compatible with a wide range of chemicals. The electro‑active component is housed within a sealed housing to protect the nozzle assembly against external contamination. The liquid feed tube extends through the full length of the nozzle; its design ensures process liquid only contacts the titanium internal flow path.

Every FUNSONIC ultrasonic nozzle works at a specific resonant frequency, which governs the median droplet size. Typical operating frequencies range from 20 kHz to 180 kHz, where higher frequencies yield finer droplets.

 

 

 

1. Regular Cleaning

Clean the nozzle on a routine basis according to actual operating conditions, such as weekly or monthly cleaning cycles. Sediments and impurities inside the nozzle can be removed with suitable solvents or ultrasonic cleaning techniques.

 

2. Appropriate Liquid Selection

Prioritize liquids with low viscosity and zero particulate impurities to keep the nozzle passage unobstructed. For liquids with suspended solids, install a filtration system upstream of the nozzle to prevent blockages.

 

3. Rational Parameter Setting

Adjust the liquid flow rate and ultrasonic power properly to avoid nozzle clogging caused by excessive flow or vibration amplitude. Optimize the nozzle's operating parameters according to the physical properties of different liquids.

 

4. Corrosion-Resistant Material Application

Select high-quality corrosion-resistant nozzle materials such as stainless steel and ceramics to reduce corrosive damage and extend the service life of the nozzle.

 

5. Auxiliary Dispersion Configuration

For liquids prone to precipitation and sedimentation, equip the system with ultrasonic dispersion devices or magnetic stirrers to inhibit sediment formation and accumulation.

 

6. Routine Maintenance and Inspection

Establish a regular maintenance routine to timely inspect and clear sediment deposits inside the nozzle. Check the condition of nozzle orifices periodically and replace damaged nozzles in a timely manner when necessary.

 

 

 

 

Hot Tags: High Focused Spray Ultrasound Round Up Atomizing Coated Nozzles with 100Khz Frequency, China High Focused Spray Ultrasound Round Up Atomizing Coated Nozzles with 100Khz Frequency manufacturers, suppliers, factory, 30Khz Low Power Ultrasonic Atomization Spray Nozzles, Ultrasonic Pharmaceutical Coating Pesticide Atomizing Nozzle 25KHz Spraying, Ultrasonic Eddy Current Spray Coated Nozzles, Silicon Dioxide Slurry Ultrasonic Long Nozzle Deep BCT Spraying, High Frequency 120khz Ultrasonic Atomization Nozzles, Customized 100K Ultrasonic Gathering Type With Flange Atomizing Nozzle