Products

Home Ultrasonic Spray Nozzle System Details

50Khz Ultrasonic Wide Type Spray Coating Nozzle

50Khz Ultrasonic Wide Type Spray Coating Nozzle

Item No: FSW-5001-L
Frequency: 50khz
Power: 1-15w
Continuous spraying amount(max): 0.5-20
Effective spraying width: 40-120mm
Spray uniformity: ≥95%
Solution viscosity: ≤30cps
Atomized particles (median value): 10-45μm（Distilled water),

Send Inquiry

Hangzhou Shengtu Technology Co., Ltd. is one of the leading manufacturers and suppliers of 50khz ultrasonic wide type spray coating nozzle in China. Welcome to buy high quality customized products at low price from our factory. Contact us for more details.

Description:

The wide ultrasonic atomization nozzle is combined with a controlled jet from a planar jet guide plate. The atomized spray is immediately entrained in the airflow on the atomized surface of the nozzle, forming a fan-shaped spray style. The speed of air flow is controllable, thus allowing low or high impact of atomized spray on products or substrates. This multifunctional air forming system can spray patterns up to 6 inches (15 centimeters), depending on the distance from the substrate. In wide area applications where multiple nozzles are used in series, the width is not limited.

The wide range ultrasonic nozzle has a larger spraying width and is mainly suitable for various medium and large area spraying applications. It can be used for various applications including float glass spraying, textile spraying, fuel cell spraying, proton exchange membrane spraying, fuel cell spraying, membrane electrode spraying, metal plastic sheets, AR anti reflective film spraying, insulation film spraying, superhydrophobic coating spraying, and flux spraying.

Parameters:

FSW5001-L

The working frequency and amplitude of ultrasonic spraying machines are important factors affecting nozzle selection. They directly affect the coating dispersion and spraying effect of ultrasonic spraying machines. The following are their impacts on nozzle selection:

1. Working frequency: The working frequency of an ultrasonic spraying computing device refers to the frequency of ultrasonic vibration, generally measured in kHz. The working frequency can have an effect on the choice of nozzles, specially the aperture dimension of the nozzle. A greater runningfrequency capability a greater vibration frequency, and the house time of coating particles in the nozzle aperture is shorter, so a smaller nozzle aperture is generally required. On the contrary, decrease working frequencies require large pore sizes to accommodate coating particles.

2. Amplitude: Amplitude refers to the vibration amplitude generated by way of an ultrasonic spraying machine, commonly measured in micrometers. The amplitude will have an effect on the dispersion impact of the coating. A large amplitude can higher disperse the coating into small particles, so a smaller nozzle aperture can be used. A smaller amplitude may additionally require a large nozzle aperture to make sure that the coating can omit easily via the nozzle.

When deciding on a nozzle, it is integral to in shape the working frequency and amplitude with the viscosity, particle size, and spraying necessities of the coating. High frequency and giant amplitude are normally appropriate for smaller particle measurement coatings and fantastic spraying requirements, whilst low frequency and small amplitude are appropriate for large particle dimension coatings and large-area spraying.

It must be cited that the working frequency and amplitude of ultrasonic spraying machines are determined by using tools layout and manufacturing, and are normally decided when purchasing the equipment. Therefore, when deciding on a nozzle, it is imperative to select it based totally on the working frequency and amplitude vary of the gear to make sure the compatibility between the nozzle and the device

Ultrasonic Spray Coated Machine 1