Customized 100K Ultrasonic Gathering Type With Flange Atomizing Nozzle

Hangzhou Shengtu Technology Co., Ltd. is one of the leading manufacturers and suppliers of customized 100k ultrasonic gathering type with flange atomizing nozzle in China. Welcome to buy high quality customized products at low price from our factory. Contact us for more details.

 

 

 

This custom 100 kHz flange-mounted focused ultrasonic atomizing nozzle turns liquid into fine droplets using ultrasonic technology. Built-in ultrasonic transducers inside the nozzle create high-frequency sound waves once powered on. These waves act upon the liquid surface to generate fine droplets. Droplets exit the nozzle, atomizing into particles ranging from 15 to 40 microns and delivering consistent, uniform atomization.

 

 

 

1. Routine Cleaning

Cleaning schedule: Clean the nozzle periodically based on operating frequency to prevent liquid residue buildup that leads to clogging or performance decline.

Cleaning agents: Select mild cleaners. Do not use strongly corrosive chemicals.

 

2. Transducer Inspection

Routine checks: Inspect the condition of the ultrasonic transducer regularly to confirm proper operation.

Overheating protection: Keep the transducer working within its rated temperature range to avoid thermal damage.

 

3. Nozzle Replacement

Wear monitoring: Check nozzle wear regularly. Replace the nozzle promptly if heavy wear is detected.

Proper nozzle selection: Always use nozzles compatible with your process liquid properties.

 

4. Prevent Dry Running

Liquid supply: Maintain continuous, sufficient liquid feed to the nozzle. Dry running can cause permanent equipment damage.

 

5. Avoid Liquid Contamination

Liquid quality: Use high-quality liquid to stop impurities from entering the nozzle and impacting performance.

Filtration: Fit a filter on the liquid supply line to block solid particles from reaching the nozzle.

 

6. Regular Power Supply Checks

Power stability: Maintain stable input power; voltage fluctuations may damage the equipment.

Cable inspection: Periodically examine cable connections to confirm no loose terminals or damaged wiring.

 

7. Storage Instructions

Dry storage: When not in service, store the nozzle in a dry, well-ventilated location. Humid environments can degrade performance.

Shield from sunlight: Keep away from direct sunlight to prevent material aging.

 

8. Operator Training

Training requirements: Operators must receive adequate training and fully understand correct operating and maintenance procedures.

 

 

 

 

 

Hot Tags: customized 100k ultrasonic gathering type with flange atomizing nozzle, China customized 100k ultrasonic gathering type with flange atomizing nozzle manufacturers, suppliers, factory, 40Khz Probe Type Ultrasonic Spray Coating Nozzle, Fuel Cell Carbon Black And Platinum Solution Catalyst Ink Ultrasonic Spraying, 120Khz High Frequency Ultrasonic Wide band Anti Reflection Coating Spray Nozzle, 120Khz Low Power Ultrasonic Spray Nozzle Coating Technology, Ultrasonic Eddy Current Spray Coated Nozzles, 120Khz Ultrassonic Fuel Cell Spraying Coating Nozzles