Ultrasonic Spraying Machine Used for THC Oil Coating of Transdermal Patches Tea Bags etc

Introduce

Ultrasonic atomization is the process of using ultrasonic energy to form a fine mist in the gas phase, that is, ultrasonic waves are generated on the vibrating liquid surface, and a peak composed of amplitude separates and breaks the liquid droplets from the surface. With the increase of ultrasonic frequency, atomized droplets become finer and finer. Under the action of ultrasonic vibration frequency, finer droplets can generally be obtained.

The soft and low-speed spray produced by the ultrasonic nozzle spray forming system often needs air forming to meet the application needs, especially in the occasions where high precision or uniform deposition is required. The atomized spray is shaped into a specific mode that can accurately control the atomized spray with low-pressure air. The spray mode can also be installed and integrated into the complete coating system using multiple nozzles in series.

Ultrasonic nozzles have been experimentally validated to spray THC oil onto health and wellness products, including transdermal patches, tea bags, and ready to eat foods. A small amount of accurate and uniform THC oil spray can form a thin coating on the product in a precise amount, while minimizing or even eliminating overspray, which is impossible to achieve by other spraying methods. Ultrasonic nozzles can strictly control the dosage of small batches and provide reliable and controlled dosage for large-scale production of transdermal patches. In addition, since ultrasonic atomization achieves a highly uniform spray, the dose remains constant over a given surface area. Accurately measure THC oil film coating onto transdermal patches and other products.

Transdermal Patch Spraying

Advantages of Ultrasonic THC oil coating:

• Reduce material consumption and excessive spraying by up to 80%
• Highly controllable spray mode can achieve reliable and consistent results
• Corrosion resistant structure
• Ultra low traffic capacity
• Low maintenance and unobstructed design
• Reduce downtime in critical manufacturing processes
• High reliability, no moving parts
• The size of atomized droplets can be controlled by selecting the frequency of the ultrasonic nozzle
• Tight droplet distribution can optimize the desired coating morphology

Tea Bag Spray Coating